Two variants of modular design infeed guides from Meusburger

meusburgerMeusburger has introduced two variants of modular design infeed guides. These are characterised by infinite width adjustment and offered in three different heights. The different adjustment options of strip width and strip lift allow for a flexible use on different stamping dies.

The E 5620 Infeed guide, with its spring-loaded bearing on one side, allows a free of play guiding for widths of 18 to 82 mm. The spring force can be optimally adjusted by means of  system compression springs. Three springs in different thicknesses are included in the delivery. With the E 5622 Infeed guide the strip is pre-centred and led through four needle roller bearings arranged in opposite pairs. The guiding rails are infinitely adjustable for strip widths in the range of 18 to 82 mm as with E 5620. A perfect match for this product is Meusburger’s E 56204 Mounting flange which can be easily fixed to, and removed from, the front end of the tool. Both infeed guide variants including accessories are available from stock in the usual high quality.

Further information: www.meusburger.com

Submit your comment

Please enter your name

Your name is required

Please enter a valid email address

An email address is required

Please enter your message

Metal Working World Magazine © 2021 All Rights Reserved